ENGINE:
Engine coolant in oil pan, similar to last year. Removed with vacuum pump.
NEW ZINCs on the Haul, pencil zinc in heat exchanger
BOTTOM PAINT - ablative
WASH / WAX Top Sides
4.15.2014
4.14.2014
AFT BILGE PUMP Repaired/ New Battery in High Water Alarm
AFT BILGE PUMP
with high water sensor and auto operation - not submersible
Replaced plastic hose clamp/threaded inserts (new) in Jabsco diaphragm bilge pump aft of diesel.
Replaced batteries in Bilge high water alarm
Turned around Bilge pump base and sensor attached to Jabsco diaphragm bilge pump.
with high water sensor and auto operation - not submersible
Replaced plastic hose clamp/threaded inserts (new) in Jabsco diaphragm bilge pump aft of diesel.
Replaced batteries in Bilge high water alarm
Turned around Bilge pump base and sensor attached to Jabsco diaphragm bilge pump.
3.15.2014
Hatches - Forward 3 lenses replace, new hinge hardware
HATCHES
Replaced glass, seals, and hinge hardware for forward 3 hatch lids. Replaced hatch lid entirely for the forward Lemar 70. Repositioned latch catches for new handles.
Used silicone to fill holes on the two smaller lids.
Replaced glass, seals, and hinge hardware for forward 3 hatch lids. Replaced hatch lid entirely for the forward Lemar 70. Repositioned latch catches for new handles.
Used silicone to fill holes on the two smaller lids.
12.07.2013
2013 Winterization
Winterized all water systems.
Used Antifreeze in Raw Water Lines
Vacuum out the fresh water lines
Used Antifreeze in Raw Water Lines
Vacuum out the fresh water lines
11.04.2013
Removed genset at HYY, personally moved battery bank and ran new cables
Hartge Yacht Yard removed the genset (Westerbeke 11.5 marine) from starboard locker.
Personally moved and wired 3 AGM batteries 200 Amp Hours each to location under starboard owner's bunk.
- secured batteries and vented the box
Personally moved and wired 3 AGM batteries 200 Amp Hours each to location under starboard owner's bunk.
- secured batteries and vented the box
3.23.2013
2013 Spring Commisioning by HYY
Mechanic changed oil, oil filter, Racor fuel filters, impeller, and pencil zinc.
Impeller pieces had broken off and therefore the mechanic found all the pieces in the heat exchanger.
Impeller pieces had broken off and therefore the mechanic found all the pieces in the heat exchanger.
Subscribe to:
Posts (Atom)