6.02.2014

Purchase needs

2 screws lost on Towrail cap
3 bolt through a needed for the port hatch
8 longer screws needed to secure dorades

Toe Rail woodwork

-Stripped varnish off 3/4 of the Port Towrail. 
-Washed and applied 2 coats Semco to the forward quarter of Towrail- weathering since April launch. 
- reapplied Semco to cock pit sole. 
- reapplied Semco to dorade teak boxes

4.15.2014

2014 Spring Commisioning

ENGINE:
Engine coolant in oil pan, similar to last year. Removed with vacuum pump.

NEW ZINCs on the Haul, pencil zinc in heat exchanger

BOTTOM PAINT - ablative

WASH / WAX Top Sides

4.14.2014

CABIN SOLE Boards - Removed and sanded down floor boards under table. They are now removable as designed.

New Zincs

New Plate Zinc, prop zinc, and pencil zinc in heat exchanger

AFT BILGE PUMP Repaired/ New Battery in High Water Alarm

AFT BILGE PUMP
with high water sensor and auto operation - not submersible
Replaced plastic hose clamp/threaded inserts (new) in Jabsco diaphragm bilge pump aft of diesel.
Replaced batteries in Bilge high water alarm
Turned around Bilge pump base and sensor attached to Jabsco diaphragm bilge pump.

New Raw Water Impeller @ 2268 hours

Old impeller had a single cracked vane

3.15.2014

Hatches - Forward 3 lenses replace, new hinge hardware

HATCHES
Replaced glass, seals, and hinge hardware for forward 3 hatch lids.  Replaced hatch lid entirely for the forward Lemar 70.  Repositioned latch catches for new handles.

Used silicone to fill holes on the two smaller lids.

11.04.2013

Removed genset at HYY, personally moved battery bank and ran new cables

Hartge Yacht Yard removed the genset (Westerbeke 11.5 marine) from starboard locker.

Personally moved and wired 3 AGM batteries 200 Amp Hours each to location under starboard owner's bunk.
- secured batteries and vented the box

3.23.2013

2013 Spring Commisioning by HYY

Mechanic changed oil, oil filter, Racor fuel filters, impeller, and pencil zinc.

Impeller pieces had broken off and therefore the mechanic found all the pieces in the heat exchanger.